F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
11. Install the bottom end cap.
NOTE: The top and bottom end caps are identical.
12. Install the (A) intermediate one-way clutch over the inner race. Install the (B) top end cap.
NOTE: The (A) lip on the intermediate one-way clutch must face upward.
13. Install the intermediate one-way clutch outer race.
NOTE: The shoulder on the outer race must face upward. When installed, the outer race must rotate counterclockwise.
14. Install the No. 8A intermediate brake drum thrust washer, engaging the (A) tabs with the (B) slots.
NOTE: Lightly lubricate the thrust washer with petroleum jelly to hold it in place during assembly.
