F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
9. Check the stack-up clearance.
1
Using a feeler gauge, check the stack-up clearance in three places, 120 degrees apart.
2
If the clearance is not to specification, install the correct coast clutch pressure plate retainer snap ring and recheck the clearance. Refer to the
Clutch Plate Usage and Clearance Specification Chart for selective snap ring thicknesses. See: Specifications
10. Install the overdrive sun gear, with the short end of the gear downward.
Direct Clutch
Special Tools