F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
2. Install the intermediate clutch piston inner seal, with the lip seal facing downward toward the cylinder.
3. Install the intermediate clutch piston.
NOTE: The piston should rotate freely in the cylinder.
4. Position the (A) overdrive clutch piston onto the (B) intermediate/overdrive cylinder at a slight angle. Then, rotate the piston while pressing it
down until fully seated onto the cylinder.
CAUTION: The overdrive piston lip seals are bonded to the piston. Use care not to damage or roll the lip seal over.
NOTE: Coat the inner and the outer lip seals with petroleum jelly.
5. Install the overdrive clutch piston return spring.
NOTE: The overdrive clutch piston return spring must be installed with fingers facing upward.
