F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
6. Using the (A) Clutch Spring Compressor Plate, the (B) Clutch Spring Compressor Bar and the (C) Clutch Spring Compressor Plate, compress the
overdrive clutch piston return spring.
NOTE: Refer to the tool chart preceding the Intermediate/Overdrive Cylinder Assembly for proper tool number identification.
7. Install the overdrive clutch piston return spring retainer. Make sure the retainer is fully seated, then remove the tools.
One-Way Clutch, A/T
Low/Reverse One-Way Clutch Assembly and Piston, Disassembled View (Part 1 Of 2)
