F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
11. Install the overdrive center shaft assembly.
1
Remove the (A) selective coast clutch pressure plate retainer snap ring, the (B) coast clutch pressure plate and the (C) clutch plates from the
(D) coast clutch cylinder.
2
Install the (E) overdrive center shaft assembly into the (D) coast clutch cylinder.
3
Reinstall the (C) clutch plates, the (B) coast clutch pressure plate and the (A) selective coast clutch pressure plate retainer snap ring into the
(D) coast clutch cylinder.
Reverse Clutch
DISASSEMBLY
1. Remove the reverse clutch piston outer lip seal.
2. Remove the reverse clutch piston inner lip seal.
ASSEMBLY
1. Follow the removal procedure in reverse order.
^
Make sure the lip on the seal faces the back side of the piston.
