F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
Torque Converter: Service and Repair
Flushing
1. Following the instructions included with the Torque Converter/Transmission Oil Cooler Cleaner, flush the torque converter.
CAUTION: Mineral spirits used to clean the torque converter must be fresh, non-chlorinated and non-halogenated.
2. After flushing, drain the remainder of the solvent.
3. Add 1.9 liter (2 qt.) of clean MERCON Multi-Purpose Automatic Transmission Fluid XT-2-QDX or equivalent MERCON approved fluid into the
converter fluid filler tube and agitate by hand.
4. Thoroughly drain the solution. MERCON(R) automatic Transmission Fluid is being replaced by MERCON(R) V as a service fluid, as per TSB
06-14-4.
