ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Torque Converter Clutch, A/T > < Cleaning and Inspection|Page 5227
Page 1
background image

Torque Converter: Service and Repair
Service and Replacement

1. The torque converter must be replaced if one or more of the following statements are true:

^

A torque converter malfunction has been determined based on the complete diagnostic procedures.

^

Converter stud(s), impeller hub or bushing is damaged.

^

Discoloration of the torque converter (due to overheating).

^

The torque converter is found to be out of specification when performing one of the following torque converter checks:
^

One-Way Clutch Check

^

End Play Check

^

Stator to Turbine Interference Check

^

Stator to Impeller Interference Check

^

Torque Converter Leak Check

^

Evidence of transmission assembly or fluid contamination due to the following transmission or converter failure modes:
^

major metallic failure

^

multiple clutches or clutch plate failures

^

sufficient component wear which results in metallic contamination.

Torque Converter Clutch, A/T > < Cleaning and Inspection|Page 5227