F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
Torque Converter: Testing and Inspection
Leakage Checks
Special Tools
1. Clean the outside surface of the torque converter.
2. Install the Torque Converter Leak Check Tool and Gasket into the converter hub.
3. Install the torque converter with the installed leak check tool into the Arbor press. Secure the press. Apply enough force from the press to seal the
tool into the torque converter.
WARNING: ALWAYS FOLLOW PROPER SAFETY PROCEDURES WHILE USING THE PRESS.
4. Apply air pressure to the valve on the leak check tool.
NOTE: Use clean, dry shop air.
