F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
7. Install the pushpins.
8. Connect the clutch pedal position switch.
9. Connect the clutch master cylinder push rod and retainer bushing.
10. Raise and support the vehicle.
WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING,
JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR
SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED
INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE
OPERATIONS.
11. Connect the clutch hydraulic line to the transmission.
12. Lower the vehicle.
13. Bleed the clutch hydraulic system See: Clutch Fluid/Service and Repair.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
