F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
-
Rotate outer race while applying pressure. If bearing rotation is rough, replace clutch release hub and bearing.
-
Inspect for any surface scoring or buffs that may impede the sliding motion of the clutch release hub and bearing. Any scoring or burrs should
be polished off with a fine grade of emery paper.
INSTALLATION
1. Install the clutch release hub and bearing.
-
Lubricate the clutch release hub and bearing at sliding points with Premium Long-Life Grease XG-1-C or -K or equivalent meeting Ford
specification ESA-M1C75-B.
1
Position the (A) spring and (B) clutch release hub and bearing onto clutch slave cylinder.
2
Push the clutch release hub and bearing against the spring.
3
Install the retainer ring.
2. Install the clutch slave cylinder.
1
Position the clutch slave cylinder.
2
Install the bolts.
3. Install the transmission.