F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
9. Press out the driveshaft yoke bearing cups.
1
Position the yoke in the U-Joint Tool.
2
Press out the bearing cup.
3
Rotate the yoke.
4
Press out the remaining bearing cup.
10. Press out the driveshaft yoke bearing cups.
1
Position the yoke in the U-Joint Tool.
2
Press out the bearing cup.
3
Rotate the yoke.
4
Press out the remaining bearing cup.
ASSEMBLY
1. Install a new bearing cup into the driveshaft yoke.
1
Start a new bearing cup into the driveshaft yoke.
2
Position the new spider in the driveshaft yoke.
3
Position the driveshaft in the U-Joint Tool.
4
Press the bearing cup below the yoke surface.
