F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
2. Remove the (A) third/fourth synchronizer, (B) third gear synchronizer blocking ring, (C) third gear and (D) gear bearing.
3. Use an (A) arbor press to remove the (B) output shaft center bearing, (C) first gear, (D) first/second synchronizer, (E) first/synchronizer blocking
rings and (F) second gear.
CAUTION: Make sure that the output shaft flange does not contact or ride up onto press cradle. Improper positioning can result in component
damage.
ASSEMBLY
1. Use (A) Dial Indicator with Bracketry to check (B) output shaft runout.
^
Check runout in several places along the output shaft. If runout exceeds specification, replace the shaft.