F 150 2WD Pickup V8-5.4L SOHC SC VIN 3 (2003)
Sunroof / Moonroof Motor: Service and Repair
ROOF OPENING PANEL MOTOR
Removal
1. NOTE: The roof opening panel should be in the closed position.
Lower the rear of the headliner.
2. Remove the three roof opening panel motor bolts.
3. Disconnect the electrical connector and remove the roof opening panel motor (15790).
Installation
NOTE: The roof opening panel module must be installed prior to motor installation.
1. NOTE: The roof opening panel should be in the closed position. Connect the electrical connector.
2. Cycle the roof opening panel motor until it stops in the closed position.
3. Remove the roof opening panel.