F 150 2WD Pickup V8-5.4L SOHC SC VIN 3 (2003)
Remove the bolts, the bearing caps and the camshaft.
5. Clean and inspect the camshaft bearing caps.
^
One of the bearing caps contains an oil flow restriction groove. Make sure the groove is free of foreign material.
Windsor engine (5.4L)
6. NOTE: The camshaft bearing caps must be installed in their original location. Record camshaft bearing cap location.
Remove the bolts, the bearing caps and the camshaft.
7. Clean and inspect the camshaft bearing caps.
^
One of the bearing caps contains an oil flow restriction groove. Make sure the groove is free of foreign material.
Installation
