F 150 2WD Pickup V8-5.4L SOHC SC VIN 3 (2003)
Canister Purge Control Valve: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
WARNING: THE EVAPORATIVE EMISSIONS SYSTEM CONTAINS FUEL VAPOR AND CONDENSED FUEL VAPOR.
ALTHOUGH NOT PRESENT IN LARGE QUANTITIES, IT STILL PRESENTS THE DANGER OF EXPLOSION OR FIRE.
DISCONNECT THE BATTERY GROUND CABLE FROM THE BATTERY TO MINIMIZE THE POSSIBILITY OF AN
ELECTRICAL SPARK OCCURRING, POSSIBLY CAUSING A FIRE OR EXPLOSION IF FUEL VAPOR OR LIQUID FUEL ARE
PRESENT IN THE AREA. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
2. Disconnect the electrical connector from the Evaporative Emission (EVAP) canister purge valve and the evaporative emissions vacuum control
hose.
3. Disconnect the two fuel vapor tubes.
1
Disconnect the EVAP canister purge outlet tube.
2
Disconnect the evaporative emission return tube.
4. Remove the evaporative emission canister purge valve.
1
Remove the bolts.
2
Remove the evaporative emission canister purge valve.
INSTALLATION
