F 150 2WD Pickup V8-5.4L SOHC SC VIN 3 (2003)
Accelerator Pedal: Service and Repair
Cable
REMOVAL
1. Disconnect the accelerator cable from the accelerator pedal and shaft.
2. Depress the accelerator cable lock tabs on the inside of the passenger compartment and push the accelerator cable into the engine compartment.
3. Remove the accelerator cable.
1
Rotate the throttle lever forward.
2
Slide the accelerator cable end from the throttle lever.
3
Depress the accelerator cable lock tabs and remove the accelerator cable from the accelerator cable bracket.
INSTALLATION
1. To install, reverse the removal procedure.