F 150 2WD Pickup V8-5.4L SOHC SC VIN 3 (2003)
2. CAUTION: If the seal remains in the pump bore, remove it carefully with a small screwdriver so as not to scratch or damage the aluminum bore.
NOTE: After removal, discard the filter and seal assembly.
Remove the filter and seal assembly by carefully pulling and rotating the filter as necessary.
3. Disconnect the shift cable.
1
Disconnect the shift cable from the manual lever.
2
Disconnect the cable housing from the bracket; position aside.
4. Disconnect the digital Transmission Range (TR) sensor electrical connector.
5. Remove the digital Transmission (TR) sensor.
1
Remove the bolts.
2
Remove the digital Transmission Range (TR) sensor.
