F 150 2WD Pickup V8-5.4L SOHC SC VIN 3 (2003)
1. Using the special tool, install the manual control lever seal.
2. Install the parking lever actuating rod.
1
Install the manual valve detent lever.
2
Install the parking lever actuating rod.
3. Install the manual control lever shaft.
1
Install the manual control lever shaft.
2
Install the inner manual control lever shaft nut.
3
Install the manual lever shaft retaining pin.
4. Install the manual valve detent lever spring.
1
Position the manual valve detent lever spring.
2
Install the manual valve detent lever spring bolt.