F 150 2WD Pickup V8-5.4L SOHC SC VIN 3 (2003)
5. NOTE: The word UP stamped on the separator plate reinforcement, must be visible when installed.
Install the separator plate reinforcement plate.
1
Position the separator plate reinforcement plate,
2
Install the bolts.
6. Install the solenoid screen assembly by pushing it in and rotating it to lock.
7. NOTE: Prior to installing the solenoid body assembly, coat the case connector bore with silicone grease.
Install the solenoid-body assembly.
1
Install the solenoid body assembly.
2
Install the nut.
3
Install the bolts and nut finger-tight.
