F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
General Module: Service and Repair
Generic Electronic (GEM)/Central Timer (CTM) Module
REMOVAL
1. Disconnect the battery ground cable.
CAUTION
-
Prior to removal of the module, it is necessary to upload module configuration information to New Generation STAR (NGS) Tester. This
information needs to be downloaded into the new module once installed.
-
Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.
2. Remove the steering column cover.
3. Remove the (A) bulkhead electrical connectors from the (B) instrument panel fuse junction panel.
4. Remove the (A) instrument panel fuse junction panel bolts and remove the (B) interior fuse junction panel nuts.
5. Disconnect the (A) Generic Electronic Module (GEM)/Central Timer Module (CTM) electrical connectors from the (B) GEM/CTM.