F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
Brake Shoe: Service and Repair
Standard
Special Tools
Removal
1. Remove the brake drum.
2. Inspect the rear brake assembly for the following:
-
the rear wheel cylinder for excessive leakage that can contaminate brake system parts, and rebuild as necessary.
-
the rear brake shoes and linings for contamination, and replace as necessary.
-
the rear brake shoes and linings for minimum thickness, above the backing plate or rivets, and replace as necessary.
-
the springs for heat discoloration, and replace as necessary.
-
the adjusting lever contact with the brake adjuster screw.
3. NOTE: To aid installation, note the locations of the short and long brake shoe retracting springs.
