F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Hydraulic Assembly
Removal
1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
Disconnect the battery ground cable.
2. Disconnect the anti-lock brake control module electrical connectors.
3. WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, Rush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally,
drink water and induce vomiting. Get medical attention immediately.
CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it
with water.
NOTE: Plug each open port to prevent brake fluid from spilling.
Disconnect the hydraulic brake lines.
1
Disconnect the inlet hydraulic brake lines.
2
Disconnect the outlet hydraulic brake lines.
4. Remove the Hydraulic Control Unit (HCU).
1
Remove the bolts.
2
Remove the HCU.
