F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
6. Disconnect the LH fuel injector electrical connections.
7. On 5.4L engines, disconnect the LH ignition coil electrical connections.
8. Disconnect the Camshaft Position (CMP) sensor.
9. Lift the engine sensor control wiring harness off of the valve cover studs.
10. NOTE: The intake manifold is removed for clarity.
NOTE: The bolts are part of the valve cover and should not be removed.
Remove the LH valve cover.
-
Fully loosen the bolts and remove the valve cover.
-
Inspect the valve cover gasket and clean the mating surface of the cylinder head.
Installation
All Vehicles
