F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
5.4 L Engine
8. Connect the EGR valve to exhaust manifold tube upper fitting.
-
On 4.6L engines, tighten both fittings starting at the top in two stages.
-
Stage 1: Hand tighten.
-
Stage 2: Tighten to 35-45 Nm (26-33 ft. lbs.).
-
On 5.4L engines, tighten both fittings starting at the top in two Stages.
-
Stage 1: Hand-tighten.
-
Stage 2: Tighten to 55-65 Nm (41-47 ft. lbs.).
All Vehicles
9. Connect the crankcase ventilation tube to the valve cover.
10. Install the Engine Air Cleaner (ACL) and air cleaner outlet tube.
11. Install the power steering fluid reservoir and bracket.
1
Position the power steering fluid reservoir and bracket.
2
Install the bolts.
12. Connect the battery ground cable.
