F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
3. Use the (A) Rear Crankshaft Slinger Remover and the (B) Slide Hammer to remove the (C) rear oil seal slinger.
4. Use the (A) Rear Crankshaft Seal Remover and the (B) Slide Hammer to remove the (C) rear main seal.
Installation
1. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These
tools cause scratches and gouges which make leak paths. Use a plastic scraping tool to remove all traces of old sealant.
NOTE: Lubricate the inner lip of the rear crankshaft seal with Super Premium 5W30 Motor Oil X0-5W30-QSP or equivalent meeting Ford
specification WSS-M2C153-G.
Use the Rear Crankshaft Seal Replacer and the Rear Crankshaft Seal Adapter to install the rear main seal.
