F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
Lightning
REMOVAL
1. Remove the Idle Air Control (IAC) valve.
1
Disconnect the electrical connector.
2
Remove the bolts.
3
Remove the IAC valve.
INSTALLATION
1. Install the IAC valve.
1
Position the IAC valve.
2
Install and tighten the bolts in two stages.
-
Stage 1: Tighten the bolts to 9 Nm.
-
Stage 2: Tighten the bolts an additional 90 degrees.
3
Connect the electrical connector.