F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
3. CAUTION: Only authorized Ford inlet hydraulic brake lines should be used. These lines are of specific design and should only be replaced with
authorized Ford parts.
Connect the hydraulic brake lines.
4. Connect the anti-lock brake control module electrical connectors.
5. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
Connect the battery ground cable.
6. Bleed the brake hydraulic system.
