F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
4. Remove the driver air bag module.
1
Disconnect the driver air bag module electrical connector.
2
Disconnect the horn switch electrical connector.
3
Remove the driver air bag module.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
-
Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and perform the diagnostic
procedure again.
-
Make sure to tighten the retaining bolts to specification.
2. Prove out the air bag system.