F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
Special Tool(s)
REMOVAL
1. Remove the upper rear corner trim panel.
2. Remove the lower corner trim panel.
3. Remove the rear safety belt retractor.
1
Use the special tool to remove the bolt.
2
Remove the rear safety belt retractor.
INSTALLATION
1. To install, reverse the removal procedure.
-
Check the restraint system for normal operation.
NOTE: Make sure that safety belt webbing is not twisted prior to installation. The SuperCab rear retractor anchor should be positioned with the
vertical leg facing outboard.
Shoulder Safety Belt Height Adjuster With Stripped Weld Nuts
