F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
Seat Belt Retractor: Service and Repair
Regular Cab
Safety Belt Bolt Bit
Special Tool(s)
REMOVAL
1. Remove the upper corner trim panel.
2. Remove the lower corner trim panel.
3. Remove the front safety belt retractor.
1
Use the special tool to remove the bolt.
2
Remove the front safety belt retractor.
INSTALLATION
1. To install, reverse the removal procedure.
-
Check the restraint system for normal operation.
NOTE:
-
Make sure that safety belt webbing is not twisted prior to installation.
-
Make sure that after an Automatic Locking Retraction (ALR) retractor is installed that the retractor is not in the ALR mode of operation when
it is installed.