F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
4. Use the special tool to remove the front safety belt anchor bolt.
INSTALLATION
1. To install, reverse the removal procedure.
-
Check the restraint system for normal operation.
NOTE:
-
Make sure that safety belt webbing is not twisted prior to installation.
-
The orientation of the SuperCab LH front retractor anchor is with the vertical leg in the rearward direction.
-
Make sure that after an Automatic Locking Retraction (ALR) retractor is installed that the retractor is not in the ALR mode of operation when
it is installed.
Rear
