ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Idler Arm|Service and Repair|Page 7882 > < Center Link|Specifications|Page 7878
Page 1
background image

Idler Arm: Service and Repair

Special Tool(s)

Removal

1. WARNING:  The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension

vehicle. This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in
unexpected inflation or deflation of the air springs which can result in shifting of the vehicle during these operations.
 

Raise and support the vehicle.

2. Remove the steering sector shaft arm drag link castellated nut.

1. Remove the cotter pin.
2. Remove the nut.

3. Use the Pitman Arm Puller to separate the steering sector shaft arm drag link.

Idler Arm|Service and Repair|Page 7882 > < Center Link|Specifications|Page 7878