F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
2. Install the power steering pressure hose.
1. Position the power steering pressure hose into the pump.
2. Tighten the pressure hose fitting.
3. Position the power steering pump and loosely install the power steering pump bolts.
4. Tighten the power steering pump upper bolts.
5. Tighten the power steering pump lower bolt.
6. NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
Lower the vehicle.
7. Connect the power steering pressure hose to the steering gear.
