F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
2. NOTE: The forward front suspension upper arm nut must be tightened first while the control arms are held at the curb position ride height.
Install the front suspension upper arm.
1. Position the front suspension upper arm.
2. Install the two bolts and nuts.
3. Install the upper ball joint castellated nut.
1. Install the nut.
2. Install a new cotter pin.
4. NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
Install the tire and wheel assembly.
5. Inspect and adjust the front end alignment.
