F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
2
Remove the retainer clip with a small screwdriver or tweezers then remove the converter regulator valve assembly.
3
Remove the retainer clip with a small screwdriver or tweezers then remove the main regulator valve assembly.
8. Remove and inspect the (A) inner and the (B) outer gerotor gears.
1
Clean all pump parts in solvent.
2
Dry the parts with compressed air.
3
Inspect the pump gears, faces, gear teeth, pump housing and mating surfaces for damage or scoring.
4
Replace the entire pump if any part is damaged or worn.
9. Inspect the (A) converter hub bushing. If scored or excessively worn, replace the entire pump. Note the orientation of the (B) lube groove.
10. NOTE: The pump assemblies are model-dependent.
Remove the coast clutch seals and discard.
1
Inspect the bushing for wear. If scored or worn, replace the entire pump.
2
Remove the coast clutch seals.