F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
3. WARNING: Always follow proper safety procedures while using press.
Install the torque converter with the installed leak check tool into the Arbor press. Secure the press.
Apply enough force from the press to seal tool into the torque converter.
4. NOTE: Use clean dry shop air.
Apply air pressure to valve on leak check tool.
5. With air pressure applied to valve, inspect for leaks at converter hub, seams and studs. A soap bubble solution may be applied around those areas
to aid in diagnosis. If leaks are present, replace converter.
