F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
2. Mount the (A) torque converter on the (B) stator support so that the splines on the one-way clutch inner race engage the mating splines of the
stator support.
3. Hold the stator support stationary and rotate the torque converter counterclockwise.
-
The torque converter should rotate freely, with no signs of scraping.
-
If there are signs of scraping, replace the torque converter.
Stator to Turbine Interference Check
1. Position the torque converter with the converter hub up.
2. Install a pump stator support, engaging the mating splines of the stator support shaft.
3. Install the input shafts, engaging the splines with the turbine hub.
