F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
Disassembly
NOTE: If main control is being replaced, refer to the parts catalog for correct parts. The main control is model-dependent.
1. Remove the lower control valve body.
1
Remove the bolts.
2
Remove the lower control valve body.
3
Remove the control valve body separator plate.
2. CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift
problems will occur.
Remove the check balls.
1
Remove two small check balls.
2
Remove two large check balls.
3. Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged