F 150 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
5. Disconnect the clutch hydraulic line from the slave cylinder.
6. Lower the vehicle.
7. Remove the clutch master cylinder reservoir and clutch master cylinder.
-
Rotate the clutch master cylinder 45 degrees clockwise.
8. CAUTION: Clean all rubber clutch master cylinder parts with Ford High Performance DOT 3 Motor Vehicle Brake Fluid
C6AZ-19542-AB or DOT 3 equivalent meeting Ford specification ESA-M6C25-A.
Clean all clutch master cylinder components.
9. Inspect the clutch master cylinder for:
-
weak spring,
-
damage to any reservoir components.
-
damaged cups.
-
scored piston.
Installation
1. Lightly clamp clutch master cylinder reservoir in a vise.
2. Fill clutch master cylinder reservoir to full line.
-
Use Ford High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or DOT 3 equivalent meeting Ford specification
ESA-M6C25-A.
3. Place clutch slave cylinder end of tube in a waste container.