F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Mastic Pad Removal Part Information:
NOTE:
Each Box of PM-12-F* contains:
^
4 bottles of PM-12 (black bottle cap)
^
4 bottles of Synclean 430D Rust Converter (white bottle cap)
^
4 foam mini roller covers used to apply PM-12 (one for each F-Series completed)
^
4 paint trays (one for each F-Series completed)
^
1 paint roller handle (handle to be reused)
NOTE:
The PM-12-F* kit is not required if a box outer panel is replaced.
**The shelf life is greatly extended if the PM-12F kit is stored between 40 and 80 degrees F. Heat freezing temperatures and vibration greatly reduce
the shelf life. For example do not store beside a compressor in direct sunlight or in freezing temperatures. For a copy of the Material Safety Data
Sheet (MSDS) go to the PTS Website.
The DOR/COR for this program is 50342.
RH Box Outer Panel Part Information for vehicles found with perforation where the butyl pad was applied (parts actually required depend on vehicle
being repaired):
RECALL PARTS SUPPORT CENTER
