F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Wheel Speed Sensor: Service and Repair
Front Wheel Speed Sensor and Sensor Ring - 2WD
Removal and Installation
1. Raise and support the vehicle.
2. Remove the parts in the order indicated in the following illustration and table.
3. To install, reverse the removal procedure.
Item 1: Harness Connector Removal Note
1. NOTE: The harness connector is located in the engine compartment secured to the fender apron.
Item 5: Sensor Ring Removal Note
1. The sensor ring is integral to the front rotor assembly.