F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Install the camshaft into the camshaft phaser and sprocket assembly and onto head. Install a new camshaft phaser and sprocket bolt finger tight.
3. Notice: Do not remove the timing chain wedge tool at any time during assembly. If the special tool is removed or out of placement, the engine
front cover must be removed and the engine must be retimed.
Notice: The timing chain must be installed in its original position onto the camshaft phaser sprocket using the scribed marks, or damage to valves
and pistons will result.
Verify the camshaft phaser and sprocket and timing chain scribe marks are still in alignment.
4. Notice: Do not allow the roller followers to move out of position when installing the camshaft.
Install the camshaft bearing caps in their original locations.
-
Lubricate the camshaft bearing caps with clean engine oil.
-
Position the front camshaft bearing cap.
-
Position the remaining camshaft bearing caps.
-
Install the bolts loosely.
