F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
6. Place the driveshaft in the special tool so the Adapter of the C-frame press exerts pressure on the ears of the differential flange.
7. Position the differential flange containing the universal joint spider against the stationary end of the press and tighten the press tool adapter against
the flange ears.
8. Press the universal joint and differential flange as far as possible without contacting the spider center and the driveshaft flange ears.
9. Remove the driveshaft and rotate the shaft and the differential flange 180 degrees. Repeat the use of the special tools and force the opposing
bearing cup outboard as far as possible.
10. Slide the universal joint spider toward the screw side of the special tool and insert the half-moon punch, supplied in the universal joint replacement
kit, on the exposed spider leg as shown.
