F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Front Door Window Motor: Service and Repair
Window Regulator and Motor-Front Door
Removal and Installation
1. Remove the front door trim panel.
2. Remove the front door watershield.
3. Secure the front door window glass in full UPWARD position with tape.
Right Front Door
4. Remove the front door window glass-to-regulator assembly bolts.
-
Loosen the glass clamp fasteners through the 2 vertical slots in the inner door panel.
-
To install, tighten to 9 Nm (80 lb-in).
5. If equipped, disconnect the front door window electrical connector.
6. Remove the front door window regulator bolts.
-
To install, tighten to 11 Nm (8 lb-ft).
7. Remove the front door window regulator and motor.
8. To install, reverse the removal procedure.