ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Rear Door Window Regulator > < Front Door Window Regulator|Service and Repair
Page 2
background image

Item 2: Front Door Watershield Removal Note

1. Do not tear or damage the watershield during disassembly.

Item 3: Front Door Window Glass-to-Regulator Bolts Removal Note

1. If removing only the front door regulator assembly and motor, secure the front door glass in the full up position with tape.

2. Loosen the glass clamp fasteners through the two vertical slots in the inner door panel.

Item 4: Front Door Window Glass Removal Note

1. Lower the regulator to the full down position.
2. Pull glass out through the top inboard side of the door.

Item 8: Glass Top Run Channel Assembly Removal Note

1. Remove the top glass run channel through the top opening of the front door.

INSTALLATION

1. To install, reverse the removal procedure.

Item 2: Front Door Watershield Installation Note

1. Watershield must be installed so that edges have a weatherproof seal.

Rear Door Window Regulator > < Front Door Window Regulator|Service and Repair