F 150 4WD V8-4.6L (2008)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator and Tube
Material
Removal and Installation
1. Remove the LH exhaust manifold.
2. Remove the oil level indicator tube bolt.
^
To install, tighten to 10 Nm (89 lb-in).
3. Remove the oil level indicator tube and discard the O-ring seal.
4. NOTE: Install a new O-ring seal. Lubricate the O-ring seal with clean engine oil prior to installation.
To install, reverse the removal procedure.
