F 150 4WD V8-4.6L VIN 8 (2010)
Cowl Moulding / Trim: Service and Repair
Cowl Panel Grille
Removal and Installation
NOTE: It is necessary to remove the left cowl grille panel before removing the right cowl grille panel.
1. Remove the wiper pivot arms. For additional information, refer to Wiper and Washer Systems.
2. Open the hood.
3. Remove the left cowl panel grille pushpin retainer.
4. Release the front edge of the left cowl grille panel.
-
Starting at the center of the vehicle, depress the forward tab and press upward on the front edge of the cowl grille panel to release it from the
cowl.
-
Continuing out from the center of the vehicle, depress the remaining forward tabs and release the rest of the front edge of the cowl grille panel
from the cowl.
5. NOTE: Attaching clips will remain connected to the cowl sheet metal.
Pull up on the rear LH edge of the cowl grille panel and disengage the 2 rear attaching clips from the cowl grille panel.