ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Front Door Panel > < Procedures|Page 7703
Page 1
background image

Front Door Limiter: Service and Repair

Door Check Arm - Front

NOTE:  Right side shown, left side similar.

Removal and Installation

1. Remove the cowl side trim panel.

2. Remove the front door check arm-to-door screw.

-

To install, tighten to 25 Nm (18 lb-ft).

3. Remove the front door check arm-to-body nuts.

-

To install, tighten to 12 Nm (106 lb-in).

4. Remove the front door check arm.

5. To install, reverse the removal procedure.

Front Door Panel > < Procedures|Page 7703