F 150 4WD V8-4.6L VIN 8 (2010)
3. Remove the 2 heat shield screws.
-
To install, tighten to 20 Nm (177 lb-in).
4. Support the transmission with a suitable jack.
5. Remove the 2 transmission support nuts.
-
To install, tighten to 103 Nm (76 lb-ft).
6. Remove the 4 transmission support crossmember bolts.
-
To install, tighten to 115 Nm (85 lb-ft).
7. Remove the transmission support crossmember.
8. To install, reverse the removal procedure.