F 150 4WD V8-4.6L VIN 8 (2010)
7. Install the headliner pin-type retainers.
8. Connect the headliner electrical connectors.
9. If equipped, connect the mirror electrical connector and the rain sensor.
10. Install the overhead console. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.
11. Install the A-pillar trim panel. For additional information, refer to A-Pillar Trim Panel See: Trim Panel/Service and Repair/A-Pillar Trim Panel.
12. Install the B-pillar trim panels. For additional information, refer to B-Pillar Trim Panel - SuperCrew See: Trim Panel/Service and Repair/B-Pillar
Trim Panel - SuperCrew.
13. Install the C-pillar trim panels. For additional information, refer to C-Pillar Trim Panel See: Trim Panel/Service and Repair/C-Pillar Trim Panel.
14. Install the floor console. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.
15. Install the driver seat. For additional information, refer to Seats.
16. Install the front passenger seat. For additional information, refer to Seats.
